|
|
Apartment building, Prievidza
Kyška, Roman ; Hofman, Petr (referee) ; Müller, Jan (advisor)
This bachelor thesis deals with the design of the apartment building. The building is located in a slightly sloping terrene in the cadastral area of Prievidza. The footprint of the building is mainly rectangular in shape with jumped parts of the facade. This is a udergroud object from the half part under the terrene with three above-ground floors. The apartment building has a total of seven apartments and a basement is used for commercial use in the hairdressing services. The remaining part consists mostly of storage and technical rooms. The KMB SENDWIX M structure is used as the construction of the perimeter walls, which consists of the main supporting structure made of sand-lime bricks and the thermal insulating layer of the contact insulation from the stone wool system. The ceiling construction is used from filigree ceiling panels and a single-skin flat roof with a 3% inclination is used to cover the building. The work contains project documentation for building realizations.
|
|
|
Apartment building
Vopálenský, Lukáš ; Jelínek, Petr (referee) ; Struhala, Karel (advisor)
The aim of the Bachelor’s thesis is the project of apartement building with outdoor parking in Humpolec, U Sokolovny street on plot no. 426/13. The plot is slightly sloping. The apartement building is not a basement and has six above-ground floors. The building has twenty dwelling units. The supporting perimeter wall of the above-ground part of the project consists of ceramic blocks Porotherm. All building is insulated with ETICS contact insulation system. Floor structure is made from reinforced concrete slab. The roof is hipped with dormers and burnt roofing. The outdoor parking consists of twenty seven parking spaces, two of which are barrier-free for people with reduced mobility.
|
|
|
Building of the municipal office
Pichner, Petr ; Lavická, Radomila (referee) ; Lavický, Miloš (advisor)
The master’s thesis deals project documentation of building of the municipal office in Jablonné nad Orlicí. The office will also serve small villages near. The house is irregular shape. It have one underground floor and two overground floors. The underground floor is only under part of house, so the house is partial basement. Part of first floor is open garage for 7 employee car. The object is roofed by sloping hipped roof with a slope of 15° from wood trusses. The house is brick and have contact insulation system. The anticipated number of employees of municipal office is 24. The building is located on flat land in centre of town in existing buildings in cadastral Jablonné nad Orlicí.
|
|
|
Multifunctional house in Svitavy
Fučík, Lukáš ; Žalud, Petr (referee) ; Štěpánek, Ladislav (advisor)
This project deals with a design of a multifunctional house in Svitavy. The object is designed as a building without a basement, detached house with four above-ground floors. It is fitted into flat terrain. Newly built multifunctional house serves two main functions. The first is the creation of nine housing units, which are accessible from the central staircase and have an individually designed entrance. The second function of the new building is commercial utilization. There are three business premises in the house, each of them has its own sanitary facilities and separate entrance. The roof is designed as single-layered, flat, composed of asphalt strips. The structural system of the building is brick, made of ceramic blocks. The building is insulated with a contact insulation system.
|
|
|
Multifunctional house
Moravec, Pavel ; Javůrek, Tomáš (referee) ; Brukner, Bohuslav (advisor)
Specified bachelor thesis deals with an insulated newly built family house for four to five-member family with added polyfunctionally in the form of project office. Proposed construction is situated in the developable area of peripheral town part of Pelhřimov, southeast part of the town on the land number 2050/174. The proposed new building facility of a family house is a two-storey building consisting two rectangles inset into each other and with a double garage. The object is set into the sloping terrain so that the main entrance to the family house is in the level of the second aboveground floor where there is an entrance hall with utility room, a garage and relaxation, quiet and night zone located. From the level of the second aboveground floor it is possible to descend into the ground of the first aboveground. The ground floor serves as a space of residential area and daily and active space. In the level of the first aboveground floor there is the multifunctional part (project office) situated. It has separate entrance from the level of the first aboveground floor. The object is based on foundation walls and the spreading concrete slab on which the structural system walled of ceramic blocks will be based. The circuit construction will be complemented by contact insulation system ETIC made of breathable grey polystyrene. The ceilings are ferroconcrete and monolithic. There is a single-flat roofing with river-washed stones. The part of the thesis is the assessment of the object from the viewpoint of the thermal properties and processing of the solutions to fire safety construction.
|
|
|
The selected parts of construction technology project - Biotechnology and biomedicine center of the Academy of sciences and Charles university
Mihal, Marek ; Venkrbec, Václav (referee) ; Henková, Svatava (advisor)
Subject of this diploma thesis is the construction and technological solutions to the main building of biotechnology and biomedicine centre in Vestec. The aim of a thesis is to propose time, technical and technological construction processes of construction. The content of a thesis is the project of site equipment, time and financial plan of construction, assembly machines, studies of realization main technological phase, inspection and test plan for plasterboard partition, technological regulations for plasterboard partition, metal facade and contact insulation system ETICS.
|
|
|
The complex of residential buildings, Praha - Jarov, civil technological project
Komenda, Tomáš ; Hrůza,, Jaroslav (referee) ; Kovářová, Barbora (advisor)
The goal of this diploma thesis is to create a building technology project for construction of 4 flat houses within stage 3a. of the building project „Green town of Prague – Jarov, phase II“. The flat houses are in two pairs interconnected by basement, each is a 7 floor high reinforced concrete building with flat roof and is functionally connected to others by a terrace garden system. This document focuses on organisation and preparation of the construction. It includes building site equipment, cost calculation for setting up and servicing of the building site with graphical illustrations for selected construction phases. Additionally a detailed time schedule was created with a proposal for stream construction of the reinforced concrete scelet and lining in the pairs of interconnected buildings. A realization study of the main technological phases was also prepared. The diploma thesis covers in detail construction of reinforced steel scelet and circumferential casing including a layer of contact insulation system. A blueprint of formwork for walls and ceiling is included in the manual for construction of reinforced steel scelet. On these particular actions probationary and control plans were added. The required machinery set with detailed placement was also drafted. An itemized budget for the main building was prepared as well. Attached to this document is a detailed manual on how to use housing units including repairs and revisions plan for next 30 years. Part of this diploma thesis is also a detailed study covering the construction in relation to the surronding living and educational areas.
|
|
|
High standard detached house
Vaňková, Michaela ; Ing.Tomáš Duriš (referee) ; Daněk, Lukáš (advisor)
This bachelor's work deal with study of high standard deteached house with the double garage. House is two – storey high with shed roof with prevailing dimentions 26 m x 10,6 m. Around the house is designed teracce follow up to garden. Entries to the house are from the teracce on first floor and from path on second floor. Supporting walls are made prom Porotherm 30 PROFI, extermal walls are extamal thermal contact insulation system.
|
|
|
Object of civic amenities
Hasoň, Václav ; Pilný, Ondřej (referee) ; Berková, Petra (advisor)
The diploma thesis elaborates on the design of a new building of freestanding retirement home in the town of Litomyšl. The design of the retirement home is in the form of project documentation for the construction. The new building includes a partial basement and three floors. The main purpose is to build a building for housing with flats for seniors and to provide health care to seniors living here and from the surrounding area. On the 1st floor, there is an administrative part, a doctor's office with the possibility of rehabilitation and a dining room with facilities for food preparation, which is imported into the home. The dining room serves both the guests and the public. The remaining part of the first floor consists of social, administrative and utility rooms. On the 2nd and 3rd floors, there are individual apartments for clients with a common room for visits and spending their free time. On the 1st floor, there is a maintenance center, boiler room, server room, furniture store, and estate depository. Basement walls are monolithic, made of reinforced concrete. The construction system of the above-ground floors is wall-mounted, bidirectional and made of ground brick blocks. The ceilings and staircases are monolithic, made of reinforced concrete. External walls are insulated with a contact thermal insulation systems. The building is mainly based on footings or foot anchors. The retirement home is located on the edge of the town near the Litomyšl Hospital. The land is suitable for construction, as it is located in the area for the construction of civil buildings.
|
|
|
Motel
Veselský, Jaroslav ; Klimek, Karel (referee) ; Čuprová, Danuše (advisor)
The subject of this diploma thesis is designing a new building of Motel in Mikulov in Moravia. The object is located near a road in the suburbs. The land is in a sloped terrain. The object has three aboveground floors. In the first floor there is a restaurant including a kitchen and the background. There are two barier free rooms for accommodation as well. In the second floor there are eight double rooms. In the western part of the object there is a multipurpose hall including its own backgroud. In this floor there are recreation rooms to be found – a library and a children’s club. The third floor consists of eight double rooms too. Some space in this floor is used for technical purposes (air conditioning equipment). The motel‘s operational part is made of cloakrooms for stuff, technical rooms and a warehouse. The construction of this building is bricked using the Porotherm system. There is flat single vegetation roof or classical-structure roof used. The building is based on base band. The perimeter wall is insulated using contact insulation ETICS system. The drawings are processed in ArchiCAD 17.
|
guest ::
